|
|
 |
 | |
| P-O2 (Plug -type Open reference Calibration) |
|
| P-O2 (Plug -type Open reference Calibration) is used with P-R2 and P-S2
to test impedance calibration. The result of impedance measurement will be
much reliable and secured by using both P-O2 and P-S2, whose impedance
characteristics are opposite to each other, in one testing progress. | |
|
|
 | |
| P-S2 (Plug-type Short Reference Calibration) |
|
| P-S2 (Plug-type Short Reference Calibration) is used along with P-O2,
whose impedance characteristics are opposite, and improve the test result. | |
|
|
 | |
| J-R2 (Jack-type Load Reference Calibration with 100W Resistor) |
|
| J-R2 (Jack-type Load Reference Calibration with 100W Resistor) is used
to check the load value at the time of impedance adjustment and to test
characteristics of cable and other contacts. | |
|
|
 | |
| J-O2 (Jack-type Open Reference Calibration) |
|
| J-O2 (Jack-type Open Reference Calibration) is used with J-R2 and J-S2
to test impedance calibration. The result of impedance measurement will be
much reliable and secured by using both J-O2 and J-S2, whose impedance
characteristics are opposite to each other, in one testing progress. | |
|
|
 | |
| J-S2 (Jack-type Short Reference Calibration) |
|
| J-S2 (Jack-type Short Reference Calibration) is used a long with J-O2,
whose impedance test measurement will be high and secured by using both J-O2
and J-S2 in a testing progress. | |
|
|
 | |
| J-YR1-0055 (1:Y Termination Type Resister) |
|
J-YR1-0055 (1:Y Termination Type Resister) is a Y-Termination for
differential and common mode termination, used instead of Balun and coaxial
terminations.(4.45 mm pitch)
*Differential mode impedance:100Ω
*Common mode impedance: 50 Ω | |
|
|
 | |
| J-YR1-0093 (1:Y Termination Type Register) |
|
J-YR1-0093 (1:Y Termination Type Register) is a Y-Termination for
differential and common mode termination, used instead of Balun and coaxial
terminations.(2.54mm pitch)
*Differential mode impedance:100Ω
*Common mode impedance: 50 Ω | |
|
|
 | |
| 4PCTAJ-2.54 (Octagonal Base Plate Socket) |
|
4PCTAJ-2.54 (Octagonal Base Plate Socket) is used with Balun Test
Setting Tool and fixes the lead wires of testing connector plugs.
| |
|
|
 | |
| AD-4.45-2.54 (Pitch Change Socket) |
|
AD-4.45-2.54 (Pitch Change Socket) makes 4.45mm pitch of BH Balun
(040-0055) apply to the 2.54 mm pitch.
| |
|
|
 |
Calibration Kit |
|
|
|
PJ2-KIT (Calibration Kit) consists of each 1 pc of
P-R2,P-O2,P-S2,J-R2,J-O2 and J-S2 (Total 6pcs).
PP2-KIT (Calibration Kit) consists of each 2 pc of P-R2,P-O2,P-S2
(Total 6pcs). |
 |
|
 |
