 |  |
| KIT-BASE-BH (BH Balun Test Setting Tool) |
|
| KIT-BASE-BH (BH Balun Test Setting Tool) sets and fixes up to 4 pcs of
Balun and supports to test the channel links and transmitting abilities of
the Baluns. | |
|
|
 | |
| 4PCTAJ-BH、4PCTAJ-N (Octagonal Base Plate Socket) |
|
4PCTAJ-BH、4PCTAJ-N (Octagonal Base Plate Socket) is used with Balun Test
Setting Tool and fixed the lead wires of testing connector plugs.
*For high qualified BH Balun / North Hills Balun : 4PCTAJ-BH
*For standard North Hills Balun : 4PCTAJ-N | |
|
|
 | |
| PCTAC5EK (Patch Code Adapter) ( Imported) |
|
| PCTAC5EK (Patch Code Adapter) conforms to TIA / EIA-568-A-4 and is for the
evaluations of transmitting abilities of the patch codes. | |
|
|
 | |
| DETAC5A (De-Embedded Reference Jack) |
|
| DETAC5A (De-Embedded Reference Jack) is a criterion jack for De-embedded
NEXT of testing plug. | |
|
|
 | |
| R090199.Rev.B (TIA/EIA Cat6 Standard Compliant De-Embedded
Reference Jack) (Imported) |
|
| R090199.Rev.B (TIA / EIA Cat6 standard compliant De-Embedded Reference
Jack) is a criterion jack for De-embedded NEXT of testing plug. | |
|
|
 | |
| R022299,RevB (TIA/EIA Cat 6 Reference FEXT Plug board)
(Imported) |
|
R022299,RevB (TIA / EIA Cat 6 Reference FEXT Plug board) is a printed
board , used by putting on the top of the plug, for FEXT of FEXT standard
plug.
| |
|
|
| |
| PCTAC6K (Modular Code Test Head Jig) (Imported） |
|
| PCTAC6K (Modular Code Test Head) conforms to TIA/EIA-568-B.2.1.ANNEXJ
and is for the evaluations of transmitting abilities of the modular
codes.(1set =2pcs） | |
|
|
 | |
| PYRA-BALUN-HOJIJIG (Balun Setting Jig) (Not including
Balun) |
|
PYRA-BALUN-HOJIJIG (Balun Setting jig) is a tool for setting Balun
to Balun on 1F board.
AU and NI coating. | |
|
|
 | |
| PYRA-BALUN-FEXTJIG (Far Side Balun Setting Jig) (Not
including Balun 1F board and Balun) |
|
| PYRA-BALUN-FEXTJIG (Far Side Balun Setting Jig) is a tool for setting
far side Balun to 1F board. | |
|
|
 | |
| PYRA－A2 (Calibration standard, Back-to-back Through) |
|
| PYRA－A2 (Calibration standard, Back-to-back Through) is a board to calibrate back-back
through close side and far side. | |
|
|
 | |
| PYRA－A3 (Common Mode Termination for NEXT, Opposite Pairs) |
|
| PYRA－A3 (Common Mode Termination for NEXT, Opposite Pairs) is used for calibrating
NEXT as a termination for opposite angled 2 pairs, and as a relay terminal
connecting board to connect up to 1F board for the rest of 2 pairs.
50Ω±0.02％ is used for terminal resistance. | |
|
|
 | |
| PYRA－A4 (Common Mode Termination for NEXT, Adjacent Pairs) |
|
| PYRA－A (Common Mode Termination for NEXT, Adjacent Pairs) is used for calibrating
NEXT as a termination for adjacent angled 2 pairs, and as a
relay terminal connecting board to connect up to 1F board for the rest of 2
pairs. 50Ω±0.02%×2 is used for terminal resistance. | |
|
|
 | |
| PYRA－A5 (Common Mode Termination , Far Side) |
|
| PYRA－A5 (Common Mode Termination , Far Side) is used for calibrating
NEXT as a termination for far side 4 pairs.
50Ω±0.02％ is used for terminal resistance is a termination for 4 pairs. 50Ω±0.02%×2
is used for terminal resistance. | |
|
|
 | |
| PYRA－A6 (Common Mode Termination for FEXT ) |
|
| PYRA－A6 (Common Mode Termination for FEXT ) is used for calibrating FEXT as a termination
for 3 pairs, and as a relay terminal connecting board to connect up to 1F
board for the rest 1 pair. 50Ω±0.02%×2.％ is used for terminal resistance. | |
|
|
 | |
| PYRA－A7 (Differential Mode Termination, Far Side ) |
|
| PYRA－A7 (Differential mode Termination, Far Side ) is used for calibrating
FEXT as a termination for far side 4 pairs.
50Ω±0.02％ is used for terminal. | |
|
|
 | |
| PYRA－A8 (1F Board for Balun) |
|
| PYRA－A8 (1F Board for Balun) is to enable the insertion of common mode
or differential mode resister terminations for the inactive pairs. | |
|
|
 | |
| PYRA－A9 (Long Pin Through Adapter) |
|
| PYRA－A9 (Long Pin Through Adapter) is a terminal connecting board
without termination.. | |
|
|
 | |
| PYRA－A10 (Pyramid Assembly) |
|
PYRA－A10 (Pyramid Assembly) is DUT connecting board used by
connecting the pyramid for impedance stability.
*Position of plugs are the same as SMP jig.
*Plastic plate is attached to avoid an adhesive the lead line and conductor
side. | |
|
|
 | |
| PYRA－A11 ( Board Assembly ,
Without Pyramid)) |
|
| PYRA－A11 ( Board Assembly) is DUT terminal connecting board. (Without
pyramid) | |
|
|
 | |
| JEITA-LNF-2 (Direct Probe Jig) |
|
JEITA-LNF-2 (Direct Probe Jig) easily measures plug NEXT.
*Position
of plugs are the same as SMP jig.
*Probe pins are changeable.
*Easy to couple with plugs.
*Return Loss -35+20 log ( f / 100)dB
[up to 500MHz] | |
|
|
 |
|
 |
